HAKKO CORPORATION
Hakko FT-802
- Thermal wire stripper for higher quality and more preciseness
- Even very fine AWG 38 can be stripped with standard blades
Features
Thermal wire stripper FT-802 enables higher quality and more precise insulation stripping.
The performance that can strip insulation with no nick can meet the requirement of the latest aerospace industry and the medical industry that require s very high quality.
FT-802 can strip the insulation of AWG 38 wire with no nick.
Conventional wire stripper could make ragged edges of insulation or damaged strands.
The blades can be securely fixed by making the frame with tweezers structure.
No need to replace a handpiece when blades get worn out.
Blades can be easily replaced by using the hex-wrench (included in the unit) and the blade removal plate.
* The blades must be cool before a replacement for safety.
Status of a handpiece at glance on the display.
User-friendly design for reduction of stress during the work.◯A handpiece is correctly set in a holder.
◯Same as the output value
◯Ready to work immediately
◯Auto sleep function will activate after passing the set time.
◯Auto sleep function is running.
◯Save output value approximately by 50%
◯Reduce blade oxidation and load on heating elements
◯Time to activate auto sleep function can be set by the unit of 1 minute (up to 30 minutes).
- HAKKO FT-8003 can strip the insulation off thick leads that HAKKO FT-8002 could not.
- If cut with a knife blade
It is not recommended to use a knife blade for cable stripping due to the high risk of cutting in the conductor or fraying shield that can result in ruining the cable.
Model No. | FT802-10 |
---|---|
Power consumption | 76W |
Station | |
---|---|
Output voltage | AC 20V |
Dimensions | 76(W)×159(H)×161(D)mm |
Weight | 1.6kg |
Wire Stripper (FT-8004) | |
---|---|
Power consumption | 72W (20V) |
Cord length | 1.6m |
Total length | 153mm |
Weight | 47g |
Optional Wire Stripper (FT-8003) | |
---|---|
Power consumption | 46W (24V) |
Cord length | <2m |
Tip to ground resistance | <2Ω |
Tip to ground potential | 1.3mV |
Total length | 155mm |
Weight | 27g |
* Length and weight for handpiece (w/o cord, blade)
- Station (with wire material indicator seal)
- Handpiece FT-8004 (with lead adjuster)
- Hexagon socket set screw (M2.5 x 2.5 [qty 2])
- Hexagon wrench (1.27 mm)
- Power cord
- Instruction manual
Blades are not included with this product. The desired blades should be purchased separately.
For No.FT-8004:G4-1601 Wire Stripper Blade Straight
G4-1602 Wire Stripper Blade AWG 18 to 28
G4-1603 Wire Stripper Blade AWG 26 to 38
For No.FT-8003:G3-1601 Knife Type Blade